Wednesday, July 1, 2009

E39 Auto-unlock Mod

Here is a super easy DIY mod I did on my E39 to add auto-unlock.

I got the idea when it bothered me so much (I really don't know why) to have to pull the door handle twice to get out of my car to undo the
autolock that the management system proffers me. Either that, or hit the lock/unlock button on the center console. For some reason, both options were maddening to me. So, with the help of my friends on the E39 forum @ Roadfly.com and viewers like you, I figured this one out. Let's begin.

Working time: This mod took me 2 hours, but I would suspect it taking you the better part of an hour now that the guesswork has been removed.

Here is your automatic shifter. I haven't figured out any remedy for the manual version because, well, I don't have a manual Bimmer.



Thanks to a sweet
vid by BSW, I found this little trick out. Put your fingers in the boot on either side and pull up. It pops out quite easily. Here is the link for the 5 min BSW vid since my pics don't do the removal justice: http://www.youtube.com/watch?v=QRzdTHf3IaU
It isn't necessary to do
all of the steps they did, but it sure is nicer to have the extra space!



You can just let the boot hold the shift cover plate up while you work...




This is the heart of this mod- the
DEI 528T Pulse Timer Relay. It is available for $25 or less at numerous places online; however, I got mine on eBay for $9.70 including shipping. This module takes in a pulse (12v+ or ground) and triggers a relay that can latch on or off (NO and NC) for 1-65 seconds. I set mine to 2.5 seconds.



There are 5 wires that need hooking up. You will notice the I only address the splicing of 4 of them here. This is because I knew before the project started (Thanks to Jim Cash @
Roadfly.com ;) that the door lock/unlock switch is thrown by a ground input. So, if you look closely, I have spliced the yellow wire out of the unit into the ground (black) for the unit. The yellow wire is the common pole of the SPDT 15A relay.

I spliced the 12v+ and ground wires (Red and Black) into the cigarette lighter outlet leads.
That'll give plenty of juice at a convenient location. I like splicers for this kind of project because they are reversible (sort of) and I don't have to solder in such a delicate area, though solder and shrink tubing is superior and should be used whenever possible.



Next I spliced
the relay output wire (brown) into the lock/unlock trigger (yellow/red striped wire) coming out of the lock/unlock switch. Again, you can see how to access this from the BSW video above.



This next part is what took me the longest. I had to find an adequate ground trigger for the 528T trigger (black/white striped wire). After 45 min or more poking around with a digital multimeter, I found this little beauty: there is a ribbon cable coming out of the shift position sensor to the right of the shifter. This sensor sends ground signals that activate each light on the shift cover plate. I found that the 3rd wire in from the rear side of the ribbon sends a ground signal to activate the reverse light on the shift cover plate. I spliced the pulse relay trigger (black/white striped) into this one. I chose the reverse position so that when I shift from drive or even neutral up through reverse to park, the pulse relay would be triggered and I would be free from my car!



Tucking the wires away. Take care that they don't get pinched by the pivoting shifter at any time or you might have a spark and fire beneath your armrest!



The unit fits just barely here.



And you are ready to roll- able to spring free from your leather covered prison at a moment's notice.

Tuesday, June 30, 2009

Remote Bottle Opener

I finally got my bottle opener fabricated, assembled, and installed. It works very well and I am excited not to be bleeding off nitrous needlessly into the atmosphere. Here is the work!

First I took off the OEM nitrous valve handle.



I got this window regulator off eBay brand new for $3.70! (plus $6 shipping) It was for an '83 Mustang. The DPDT Switch and DPDT Relay are radio shack specials.



Next I fashioned an adapter between the regulator output and the square valve shaft. I originally thought I was going to have it stand off more, thus the 2.5" long adapter. I only used about 1/2" after all.



With that ready, I tapped it all together with the hammer and onto the valve body. The gear has effectively become the new handle so it shouldn't have to be removed for fillings.


The regulator motor will fit on like so.


Next I had to take measurements with the ol' calipers, CAD render and cut out the bracket system. Then machine, drill, and tap everything to be put together.



It went together smooth. Notice that I've used wig-head machine screws to hold to regulator on. This is for quick release when bottle filling time comes.




Installing it was a pain. All that time in the trunk and running lines and checking wiring- BLAH! But it all works great now and I am very glad with my $10 remote bottle opener!

Wednesday, June 10, 2009

E39 Sound Upgrade

Tired of your weak old "premium sound" system in your E39? Me too. Too timid to pay $500+ for a BSW stage 1 bolt on sound system? Me two. Shy about cutting massive irreversible holes in your rear deck? Me to.

How would you feel about a reversible, noninvasive bolt-on sound system upgrade that will work in tandem with your factory system? Me dos ; )

Here is my solution to the weak, WEAK BMW factory sound. This setup was custom designed and fabricated for my 2001 540i. I do not have the premium sound or DSP package -just the regular ol' 10 speaker surround. Nor do I have fold down seats or electric rear shade.

I have already made a set for myself and now also JimC in San Diego (forum friend on Roadfly.com) who wanted a set. Email me @ Ranh316@gmail.com for you own set!

Take a peek it my pics:

Here are the fatty stock "woofers." Their sealed enclosure is just massive. Plenty of room to replace with something better. (And my wife's foot. Like PJ's?)


For some beefy sound, I opted to install these hearty Infinity Reference 9623i series 6x9" three-way 4 ohm nominal speakers. I boosted them with an additional amp but acceptable sound could be wired in right from your factory amp. The cardboard cutout is what I used to fashion plates for rigid attachment.



Here is the heart of my mod: two 1/8" thick aluminum plates to hold the speakers. Some weather stripping to eliminate clicking.



The plate matches well to the stock enclosure.



The speakers fitted and installed.


Everything going back together well and eventually totally hidden.





And a poor-quality video I took of the end result. The music is rich and full. It sounds horridly distorted on the video but I assure you that it is just that the mic can't take the volume. This is meant to be more of a demonstration of the functionality of the install and to show off my speakers :) than an accurate display of sound reproduction.